Pro-Ject T1 EVO Phono

Turntable w/ Upgraded MM Phono Preamp & OM 10

Pro-Ject T1 EVO Phono

Turntable w/ Upgraded MM Phono Preamp & OM 10
$499.00
Select Color Options:

Select Cartridge

Contact Us

Overview

The T1 EVO Series adds the classic Ortofon OM 10 phono cartridge, a larger ‘Debut-sized’ sub-platter as well as electronic speed change for all models. T1 EVO Phono has a built-in MM phono preamp for connection to any line-level input. The phono preamp can be disengaged too if you’d rather use your own!

Watch our Comparison

T1 EVO – Your Introduction to High-Fidelity

The T1 EVO aims to deliver true high-fidelity sonics for vinyl enthusiasts on a limited budget. Boasting premium materials, stylish aesthetics and rich, lively sound quality, our extensive development process has ensured no compromise to sonics in the design & build of T1 EVO. The stylish CNC-machined plinth (available in gloss black, satin white or satin walnut laminates) uses no plastic and is carefully manufactured to eliminate resonant hollow spaces that would otherwise detract from sound quality. ‘Sound-first’ principles are implemented throughout. The glass platter is heavy and non-resonant, again avoiding the flaws of plastic and cheap steel alternatives. Additionally, the purpose-selected turntable feet are highly effective in isolating the T1 EVO from ambient vibrations in the vicinity of your hi-fi system.

Audiophile Implements

T1 EVO’s motor drives a belt attached to a larger sub-platter (Debut-sized!) which rotates in a bearing assembly machined to tolerances within 0.001mm. It’s comprised of a stainless steel spindle in brass bushing. All told, the T1 EVO drive system ensures stable & accurate platter speeds with non-resonant behavior, allowing the tonearm & cartridge to perform their very best. The tonearm is an 8.6″ one-piece aluminum design, meaning the headshell and armtube are integrated for the sake of rigidity & resonance control. High-quality bearings allow for silent & frictionless motion of the tonearm. Supplied with an Ortofon OM 10 moving magnet cartridge featuring an elliptical diamond stylus tip, this is a true hi-fi playback system with no corners cut! The cartridge is aligned, tracking force is set at the factory and anti-skating is built-in, sparing you the trickiest parts of turntable setup so that you can be spinning vinyl in mere minutes.

Details & Specs

Model T1 EVO Phono Turntable w/ Phono Preamp
Speed 33 & 45rpm (electronic speed change)
Principle Belt driven sub-platter
Speed variance 0.7% (33rpm), 0.6% (45rpm)
Wow & Flutter 0.25% (33rpm), 0.23% (45rpm)
Platter Heavy 8mm-thick blasted-glass platter
Main bearing Stainless steel axle in brass bushing
Signal to noise 65dB
Tonearm 8.6” one-piece aluminum
Effective arm length 218.5mm
Overhang 22.0mm
Effective tonearm mass 8.0g
Counterweight for mass 5-10g (pre-adjusted)
Tracking force range 0-5g (set at 1.75g)
Included accessories dust cover, felt mat, power supply, high-quality phono/line RCA cable
Power supply 110-240V 50-60Hz 15V DC (800mA)
Power consumption 4.5W max
Dimensions 16.34 x 3.94 x 13.19″
Weight 8.38 lbs

Reviews

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)