Marantz Model 30

Integrated Amplifier with MC & MM Phono Input & Sound Tuning

Marantz Model 30

Integrated Amplifier with MC & MM Phono Input & Sound Tuning
$2,999.00
Select Color Options:

Contact Us

Overview

The High Notes

Modern Musical Luxury

Timely industrial design, delivering the most musical sound, with qualities that make it special to use and last for generations

Like Separates in One Box

With two different power supplies and total isolation of the circuit board, the Model 30 amp gives you the performance of separate components in a single convenient package

Tuned by the Marantz Sound Master

The most coveted job at Marantz of Japan is that of Sound Master. These passionate audio experts go so far as to evaluate the sound of identically speced audio component parts to help bring your experience closer to real music

Exquisite sound tuning

MODEL 30 continues the renowned heritage of exquisite Marantz amplifiers. Tuned by the Marantz Sound Master who channeled his passion, experience, and extraordinary ear into the amplifier design.

The most musical, accurate, detailed sound

MODEL 30 is built on its own discrete circuit board, the Hyper-Dynamic Amplifier Module, or HDAM. By custom-curating hundreds of individual parts, rather than adopting an off-the-shelf solution, the MODEL 30 HDAM significantly outperforms standard integrated circuits to create the unique musicality you always expect from Marantz.

Marantz Musical Premium Phono EQ

Envisioned to deliver optimal sound quality by simplifying the signal path – vital given the delicate nature of phono signals – the Phono EQ stage in the MODEL 30 amplifier can be used with both moving magnet and low-output moving coil cartridges, thanks to a built-in MC head amplifier. The design lowers distortion, which is why the phono stage uses two-stage amplification, combining Marantz HDAMs with JFETs in the input stage, giving high input impedance. This allows the non-negative-feedback design to be further simplified by the deletion of coupling capacitors, again reducing distortion and enhancing signal purity.

MC / MM phono input impedance selector

In order to optimize sound performance when using a moving coil (MC) or magnetic moving (MM) cartridge, and to accommodate all configurations as much as possible, MODEL 30 is equipped with an input impedance selector. The input impedance can be adjusted to three different settings: MC LOW (33 ohm), MC MID (100 ohm) and MC HIGH (390 ohm).

Analog-feel Volume Control

Newly developed electric volume control uses the latest volume control IC to realize better channel separation, dynamic range, and distortion-reduction. MODEL 30 employs a new Marantz-designed electric volume control for high linearity and best-in-class channel separation. In other words, you always get the volume precisely how you want it.

Fully Discrete Current Feedback Pre-Amplifier

Current Feedback pre-amplification with HDAM-SA3 is a well-known, Marantz-original circuit technology, thoughtfully designed to match the requirements of super audio High-Resolution music for wide-bandwidth and high-speed reproduction. Being fully discrete, each part can be individually selected and optimized for sound quality and performance by the Marantz Sound Master during long listening sessions.

Switching Power Amplification

MODEL 30 maintains the purest possible sound and supports the power needed to drive the most demanding speakers. The amplifier output stage of MODEL 30 allows a large power output, delivering 2x100W into an 8ohms load, and easily copes with low impedance speakers thanks to a 2x200W output into 4ohms. Because the feedback is taken after the output filter coil in this switching amplification design, the output frequency response stays the same and is not influenced by the impedance of the connected loudspeaker, ensuring the most musical sound no matter the loudspeakers. The amplifier module connects directly to the rear panel PCB on MODEL 30 to minimize the output path to maintain signal purity and sound stability.

Carefully selected components

Marantz has built a reputation for choosing the best possible components for its products. Extensive, loving tuning has long been the secret of fine-sounding Marantz amplifiers. Marantz engineers select and optimize each component through careful listening in dedicated Marantz facilities in Europe and Japan. During the development stage, every part is carefully selected, tested, and validated by the Marantz Sound Master to ensure you get that perfect Marantz sound every time you listen.

Two independent power supplies

MODEL 30 boasts two independent power supplies for the best separation between the pre-amplifier stages and power amplifier stage, where signal levels are still low and the audio signal is sensitive to any distortion, and the power amplifier stage, which drives the speakers with high signal levels and current. The MODEL 30 power supply circuit, designed exclusively for the preamplifier, enables a stable power supply that is not affected by fluctuations from power demanded by the power amplifier stage. An oversized toroidal transformer, known for its clean supply, is dedicated exclusively for the preamp to ensure high purity. A double shield steel case is mounted around the transformer to suppress the leakage flux that could affect peripheral circuits. The power supply for the power amplifier stage is designed to deliver high current instantaneously to the switching mode amplifier. This ensures full control over connected speakers to follow even the hardest bass attacks and provides clean power for the reproduction of the finest details.

Multiple Analog Inputs and Outputs

In addition to phono and CD analog inputs, MODEL 30 features two line-level inputs and one pair of recorder input/output jacks that enable the connection of multiple sources and recorders. Use MODEL 30 as a standalone stereo power amplifier for additional system configuration versatility with the included power amp direct input. For example, use the front pre-outs of your AV setup and run them through MODEL 30 power amps.

  • Tuned with passion by the Marantz Sound Master.
  • Output: 100W + 100W (8ohm), 200W + 200W (4ohm).
  • Fully-discrete design for signal purity.
  • Custom HDAM®-SA3 circuitry for clean, optimal dynamics.
  • Separate amp and preamp power supplies reduce interference.
  • Toroidal transformer dedicated to preamp for clarity and power.
  • Current feedback preamp design with its wide-range circuitry.
  • MM/MC Phono input with its Premium Phono EQ circuit.
  • Brass machined input terminals for CD and Phono.
  • Marantz original high-quality/high-purity copper speaker terminals.
  • Linear volume control with new electric volume system.
  • Amplifier design inherited from our flagship models.
  • Available in Black and Silver Gold.

Reviews

Customer Reviews

Based on 2 reviews
50%
(1)
50%
(1)
0%
(0)
0%
(0)
0%
(0)
G
Gak
Nice to look at

I’m replacing a 45 year old luxman R1050 receiver and having high hopes for a great improvement in the quality of the overall performance of my listening pleasure. The difference between the two units sound quality is not as different as I’d hoped for. But that doesn’t mean I not pleased with the Marantz it is extremely beautiful and the quality is great!

H
Hank
Very pleased

I have been amazed that this amplifier is able to drive my Bowers and Wilkins 802 speakers with no problem at all.