Why do we need digital-to-analog converters?
Fifty years ago, we didn't need DACs to produce an analog signal. Microphones inside a recording studio captured and stored sound as analog signals, usually in the form of reel to reel tape. The analog signal was then pressed into record grooves. Whenever you wanted to listen to a song, the needle on your turntable “felt” those grooves and created an electrical analog signal. It transmitted the signal through your preamp and, ultimately, your speakers.
Today, recording engineers convert analog signals to a bitstream of numbers (ones and zeroes). That series of numbers is a digital audio signal. In order to listen to it, you need to convert it back to an analog signal.
That’s why we need DACs. Without them, we wouldn’t be able to enjoy digital audio’s portability and convenience.
Here’s how the process breaks down:
1. During the recording process, an artist lays down a track. Microphones pick up the sounds of voices and instruments as analog audio signals.
2. Recording engineers store the analog signals as digital. Recording equipment uses analog-to-digital converters to transform the analog signals to digital signals for storage.Nowadays, this usually means storing them as digital signals as a digital audio file.
3. During playback, a DAC decodes the stored digital signals. In doing so, the DAC converts those signals back into analog audio.
4. A DAC sends the converted analog signals to an amplifier. The amplifier, in turn, sends music through your headphones or stereo speakers.
As cool as this process is – and we do think it’s pretty cool – there’s a bigger question at hand: Is the DAC inside your device good enough? For those of us who value great sound, it often isn’t.
By opting for an external, or outboard, DAC, you can enjoy sound quality that’s far superior to what your device’s sound card produces. The result? Noticeably better sound quality that heightens your overall listening experience. It’s a worthwhile investment.
An outboard DAC usually offers better sound quality
We know that a digital-to-analog converter makes it possible to listen to music stored in digital formats. So what makes one DAC better than another?
For starters, it's important to understand what's going on inside a DAC. Remember how we said a DAC converts a bitstream of ones and zeroes into analog signals? Well, a DAC doesn't always convert that bitstream to analog according to a consistent timing sequence. These are known as clocking errors. During playback, they reveal themselves as jitter.
And jitter during playback has a negative impact on fidelity. In layman's terms, your music just doesn't sound as good. It can lose that great sense of excitement and involvement you get at a live concert.
Internal DACs inside most devices aren't equipped to handle clocking errors very well, so they create more jitter. On the other hand, most external, or outboard, DACs are equipped to mitigate these errors. As a result, they more effectively reassemble your music from the bitstream of ones and zeroes.
You’re getting more consistent, jitter-free sound.
Types of outboard digital-to-analog converters
You can use an outboard DAC in just about every listening setup. That said, the DAC you select needs to "fit" the type of device from which you play your music:
Desktop and laptop computers: For most modern computers, you should use a USB DAC. Just connect a USB cable to an available port on your device. Then connect that cable to the corresponding input on your DAC. If you are using headphones, many USB DACs will have a headphone amp built in for your headphones. To connect your computer to your audio system, you need to run an audio cable from the DAC to your system. With some computers, you might have to go in and assign the audio out to the DAC.
Smartphones and tablets: For smaller devices that you use on the go, all you need to do is purchase an adaptor that enables a USB connection from your device's digital output. On a smartphone, this will usually be the same output you use to connect your charger. To the USB end of the adaptor, connect a small DAC built for portables – the AudioQuest Dragonfly is an excellent choice – and plug in your headphones. You're ready to go!
Home Stereo Systems: This is where you will probably have the most choices for connections. You can use a USB DAC to connect your laptop or computer to your stereo system. If your music streaming player has a digital output, you can add a DAC to improve its sound in your system. Using all-in-one powered speakers? Many of them come with a built-in high-performance DAC that connects with either a USB or digital input. The bottom line: You should be able to connect a DAC to your existing system, whatever it is, and get great sound.
And while an outboard DAC lends a hi-fi boost to most devices, it is possible to select equipment that comes with a high-quality DAC inside. Knowledge, after all, is power. If you know what you're looking for (and you already know you're looking for a high-quality DAC, right?) you can limit your options to equipment that comes equipped with all the goods.
Now let's dig into some great outboard DACs and consider equipment that comes pre-loaded with a great DAC.
Recommended DACs
